Page 1 of 1
New Coningsby VHF Frequencies
Posted: Fri Jun 14, 2024 8:28 pm
by Gary
Two new VHF frequencies
U3549/24 - THE FOLLOWING CONINGSBY FREQ WILL CHANGE:
VHF TWR 124.680MHZ
VHF GND 121.855MHZ. 28 JUN 07:00 2024 UNTIL PERM. CREATED: 12 JUN 16:28 2024
Re: New Coningsby VHF Frequencies
Posted: Mon Jun 17, 2024 9:25 am
by captain scarlet
Well, I've changed it in my yupiteru 7100 but my uniden 125 won't accept the numbers as it defaults back to .25 kHz spacing . . . any ideas as to how I can input these into the uniden??
Re: New Coningsby VHF Frequencies
Posted: Mon Jun 17, 2024 10:59 am
by Magpie
I may be wrong but as far as I know, the actual r/t freqs have not changed. The renaming only has to do with the 8,33 jaron.
Hth.
Re: New Coningsby VHF Frequencies
Posted: Mon Jun 17, 2024 11:05 am
by captain scarlet
So I don't need to re-tune my scanners then?
Re: New Coningsby VHF Frequencies
Posted: Mon Jun 17, 2024 1:02 pm
by Rhubarb
Correct for example 121.850 at present, changed to 121.855 will be un-noticed by your scanners due to their receive filtering.
Save your finger ends !
Cheers
Re: New Coningsby VHF Frequencies
Posted: Mon Jun 17, 2024 3:25 pm
by captain scarlet
Thank you for the replies,
I'll leave my scanners as they are then.